激光焊接对接拼缝测量的微景深方法

对于复杂微细、错边量小的激光焊接拼缝测量,现有的视觉传感器方法不能稳定、可靠地提取出拼缝的中心位置、拼缝宽度等信息。为此,提出了基于微景深的激光焊接对接拼缝测量方法,该方法采用高倍光学放大镜头、工业CCD(Charge Coupled Device)/CMOS(Complementary Metal-Oxide-Semiconductor Transistor)相机和LED(Light-Emitting Diode)外部照明装置,以光学成像光轴与被测表面法矢呈45°的方式,组成的对接拼缝的非接触测量系统,既解决了显微放大时景深很小、测量范围小的问题,又解决了狭窄拼缝高光学放大倍数拼缝检测的难题。实验结果表明,该系统可快速准确地提取出拼缝中心坐标、拼缝宽度以及拼缝局部表面法矢。拼缝宽度测量精度优于5 μm,拼缝中心测量精度优于6 μm,可识别的最小拼缝宽度为0.02 mm,完全满足激光焊接对接狭窄拼缝的检测与自动跟踪的要求。     

热喷焊技术在导板强化中的应用

用氧化乙炔焰热喷焊技术对普碳钢导卫装置进行表面强化，制成复合材导卫以替代高碳高合金导卫，取得较好效果。     

齿轮类零件电子束焊接结构的合理性分析

综述了齿轮类传动零部件采用电子束焊接加工的优越性，指出零件在不同结构尺寸、不同使用环境以及不同工艺状态下应选用与电子束焊接工艺相适应的焊缝结构，并对不同零件的焊缝接头结构形式的合理性进行了深入分析。     

基于数据挖掘的焊接生产管理平台

焊接生产规模不断向自动化和流水线方式发展 ,对生产管理水平提出了更高的要求。为了从车间已积累的大量的生产历史数据中获得潜在的规律性和趋势 ,为管理者提供决策支持 ,文中在已有的质量在线监测平台和数据库系统上开发了基于先进的数据挖掘技术的焊接生产管理平台 ,同时为了获得有效的挖掘模式 ,对数据进行了预处理 ,建立了焊接车间数据集市。该平台主要使用控制图控制焊接生产产量和废品数量 ;利用决策树方法分析废品产生因素 ,获得了有效的挖掘模型 ,对于指导焊接生产具有重要意义     

Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys

The material flow and microstructural evolution in the friction stir welds of a 6061-Al alloy to itself and of a 6061-Al alloy to 2024-Al alloy plates of 12.7 mm in thickness were studied under different welding conditions. The results showed that plastic deformation, flow, and mechanical mixing of the material exhibit distinct asymmetry characteristics at both sides of the same and dissimilar welds. The microstructure in dissimilar 6061-Al/2024-Al welds is significantly different from that in the welds of a 6061-Al alloy to itself. Vortex-like structures featured by the concentric flow lines for a weld of 6061-Al alloy to itself, and alternative lamellae with different alloy constituents for a weld of 6061-Al to 2024-Al alloy, are attributed to the stirring action of the threaded tool, in situ extrusion, and traverse motion along the welding direction. The mutual mixing in the dissimilar metal welds is intimate and far from complete. However, the bonding between the two Al-alloys is clearly complete. Three different regions in the nugget zone of dissimilar 6061-Al/2024-Al welds are classified by the mechanically mixed region (MMR) characterized by the relatively dispersed particles of different alloy constituents, the stirring-induced plastic flow region (SPFR) consisting of alternative vortex-like lamellae of the two Al-alloys, and the unmixed region (UMR) consisting of fine equiaxed grains of the 6061-Al alloy. Within all of these three regions, the material is able to withstand a very high degree of plastic deformation due to the presence of dynamic recovery or recrystallization of the microstructure. The degree of material mixing, the thickness of the deformed Al-alloy lamellae, and the material flow patterns depend on the related positions in the nugget zone and the processing parameters. Distinct fluctuations of hardness are found to correspond to the microstructural changes throughout the nugget zone of dissimilar welds.     

绝缘门极双极性晶体管（IGBT）在焊接逆变器中的应用

本文介绍绝缘门极双极性晶体管(IGBT)的基本结构、工作原理、开关特性以及在焊接逆变器中的应用。     

Ni－Fe－Cr－B－Si涂层超塑扩散焊接的强化效应及耐磨性

研究了Ｎｉ－Ｆｅ－Ｃｒ－Ｂ－Ｓｉ合金涂层超塑性扩散焊接及焊接后的强化效应。通过对涂层的组织结构分析、硬度及耐磨性能的测试表明，当基材（５ＣｒＭｎＭｏ钢）与涂层产生协调超塑变形时，涂层原颗粒间、涂层与基材结合界面完全焊合。超塑焊合后的涂层比高频重熔及火焰重熔涂层硬度（ＨＶ）提高１００－１５０，耐摩擦磨损性能提高３０％。指出，沉淀强化、细晶强化及晶内位错密度增加是引起涂层强化效应和提高耐磨性的主要因素。     

焊缝跟踪技术的研究与展望

本文回顾了电弧焊接的焊缝跟踪技术，并重点对该技术的发展趋势进行了介绍与分析，